The latest developments in electronic components, from semiconductors and sensors to connectors, passives and power devices. Reporting covers new technology, manufacturing, availability and product lifecycle.
Japan’s mobileFab keeps half-inch wafers enclosed as they move between three lithography tools small enough to travel by truck.
The A-coded male and female connectors have three or four contacts, 360° shielding and an IP67 rating.
Cree’s XLamp X21 uses a smaller emitting area, with the company reporting a tighter beam from a smaller mixing optic in its comparison.
The total includes roughly €700 million in fund commitments alongside co-investments. The platform has already backed four businesses.
The expanded range also includes 10 V options that can source up to 1,020 A for power stage testing.
The Vulcon range starts with automotive and industrial power devices, with first shipments to Europe and Asia expected by year end.
Its 64 GB to 256 GB iNAND CL EM181 uses one package across the range and lets the host set aside an SLC partition for frequently written data.
Infineon looked at where a single GaN switch can replace two transistors, Harting and Phoenix Contact got into the finer points of wiring a factory with Single Pair Ethernet and a Munich company explained how it uses a diamond to find a short inside a sealed chip.
The modular DIN rail controller uses PLCnext and is aimed in part at retrofits that need to keep an existing KNX installation.
Arm is offering Helium in a compact core. A faster filter only frees up as much of the processing cycle as that filter was using in the first place.
Nordic Semiconductor's nRF54LS05A and nRF54LS05B SoCs have entered mass production, with smaller package options and a 2-layer reference design aimed at high-volume products.
Samsung SDI will supply cells made in Europe and LG Energy Solution will supply cells made in the US, with deliveries expected from the late 2020s.
The London startup’s electronica pitch centres on using one machine-readable description of silicon to produce software, tests and simulations.
Omnyx Edge combines boundary scan, device programming and contactless checks on switching signals in an automated production test platform.
Chomerics, a division of Parker Hannifin, is releasing a thermal gap filler pad combining 12.0 W/m-K conductivity with low silicone oil bleed for mission-critical electronics.
The planned demonstration combines absolute encoder feedback and EtherCAT drive communication with a separate host for trajectory planning.
Renesas has launched Xplore Developer Hub, giving Renesas 365 users access to sub-$12 RA MCU boards and more than 100 application-oriented software building blocks in one cloud environment.
Imec set an early 2027 target for its silicon interposer design kit as Infineon brought a processed 300 mm silicon carbide wafer to Munich. The opening day also included a European sensor launch and demonstrations of electronic fuses and printed displays.
The PH18 design kit lets designers simulate electronic and optical circuits together while Tower retains foundry verification and tapeout.
onsemi's fourth-generation trench SiC platform claims up to 30% higher power density and 35% lower losses, with 750 V automotive bare die available now.
The transaction would bring the semiconductor photoresist supplier under Mitsui’s voting control, subject to regulatory clearance.
A bidirectional design developed with Altera and a unidirectional design developed with NXP give the show two different examples of electronic circuit protection.
Infineon has processed 300-millimetre silicon carbide wafers into functional power devices at its Villach fab, using existing silicon production equipment.
The six-figure production award covers custom connectors at the interface between aircraft wiring and engine control or monitoring equipment.
Onsemi and the Czech Ministry of Industry and Trade have agreed not to proceed with the 2024-announced plan for end-to-end silicon carbide production at Rožnov pod Radhoštěm.