Explainer

Haptiv8’s insole vibrates when the heel touches down

AND Technology Research helped fit a heel sensor, battery and adjustable haptics into a prototype that can flex inside a shoe.
A person’s trainers and shadow on an asphalt road mid-step.

Illustrative image: Alfredo Guri on Pexels

Haptiv8’s insole gives a vibration cue when it detects the heel touching down. The idea came from founder Nicki Allen, who has a background in paediatric physiotherapy. The intended users are children who walk on tiptoe, and the prototype puts the feedback inside the shoe so it can respond during the step.

AND Technology Research says it built a working sensor prototype, designed the battery management and developed a housing for the electronics. The unit had to sit discreetly in the insole, stay flexible enough to wear and hold its parts in place as the shoe bends. Putting a battery and vibration actuator in that space means accounting for where they sit under load as well as how much power the feedback consumes. ANDtr also says it made the vibration adjustable. Its case study does not give a sensor part number, the actuator type or a battery runtime.

A prototype can pick up heel contact reliably in one setup and still need work before it will behave the same way in another shoe. In a design like this, different heel positions or loads can change what reaches the sensor, and the surrounding material can change how strongly the wearer feels the actuator. A useful production test would check how often the insole detects the intended step across sizes and after repeated flexing, alongside what happens to its response as the battery runs down. The published case study does not report results from those tests.

ANDtr lists Haptiv8 among the first cohort of its Embedded Accelerator. LYVA Labs, which supported the company, says Allen also tried the prototype with children and parents at the specialist school where she worked. Neither account gives manufacturing yield or establishes clinical effectiveness.

Sources: ANDtr’s engineering case study; Haptiv8’s product description; ANDtr’s first cohort and programme announcement; LYVA Labs’ account of prototype development.

Continue reading