EU acoustic sensor project yields 14 demonstrators

Image: Infineon
The EU-funded research project Listen2Future has concluded after more than three years, producing 14 demonstrators built around new piezoelectric materials, MEMS acoustic sensors, electronics, packaging and AI-based signal processing. The project was led by Infineon Technologies Austria and involved 27 partners across seven countries, with a total budget of around €30 million funded through Chips JU grant agreement No. 101096884.
The consortium targeted compact, lower-energy acoustic sensing for applications currently limited by size, power consumption or cost. Work spanned materials and MEMS device development through to system integration and application-specific algorithms.
Healthcare demonstrators
In healthcare, the project built compact ultrasound demonstrators and researched miniaturised ultrasound transducers with associated electronics and signal processing for future mobile ultrasound systems. For infection diagnostics, ultrasound demonstrators were developed to support non-invasive detection of serious infections; in one use case for detecting meningitis in newborns, scan time was reduced from ten to three minutes, according to the project. Separately, compact sensor technologies for future hearing aids and hearing systems showed what Infineon describes as promising characteristics at high sound pressure levels, though the company states that further work is needed in system integration, long-term testing and user trials under realistic conditions.
Energy and industrial monitoring
For the energy sector, the consortium designed an AI-based acoustic sensor system to detect partial discharges, small electrical discharges that can indicate early insulation damage in power lines, substations and transformer stations. Tests carried out during the project demonstrated the potential of this approach for condition monitoring, according to Infineon, which the company says could support predictive maintenance of energy infrastructure.
For industrial quality assurance, the project investigated contactless, non-destructive testing using compact piezoelectric micromachined ultrasound transducers to detect material changes and small defects. A testing system developed within the project was made 80 percent lighter and 50 percent smaller than the reference solution used for comparison, Infineon states, which it says opens possibilities for mobile and automated testing in manufacturing, energy technology and aviation.
Project scope and outputs
Listen2Future partners included Infineon Technologies Austria and Infineon Technologies AG, GE Healthcare Austria, imec, Sonion Nederland, Elliptic Laboratories, Sonitor Technologies, Hahn-Schickard and several universities and research institutes across Austria, Belgium, the Czech Republic, Germany, the Netherlands, Norway and Spain. The consortium reports 77 scientific publications, including 49 open access, results presented at 67 international conferences and workshops, and more than 354 total communication and dissemination activities. All partners developed patents, technology roadmaps and individual exploitation plans as part of the project close-out.
The outputs are demonstrators rather than shipping products; Infineon describes the results as a foundation for further research, development and technology transfer rather than finished commercial systems.



