News

JEDEC starts reliability work on boards with their cooling hardware fitted

The JC-14.8 subcommittee will develop tests for complete assemblies, including solder joints on powered boards under the load of an installed cold plate.
A copper cold plate and coolant lines mounted over a processor. Illustrative cooling installation.

JEDEC has set up a subcommittee to develop reliability tests for complete electronic assemblies. Its first topics include thermal and power cycling, thermal shock and the behaviour of systems fitted with liquid or immersion cooling. The group, designated JC-14.8, intends to test against duty cycles that reflect how the equipment is used in applications such as data centres and vehicles.

One of its first tasks is to look at solder joints on a powered board with the cooling hardware in place. A cold plate puts a clamping load on the assembly, while mounts and cables can load other parts of the board. As the board heats and cools, those forces can change the strain at the joints. JC-14.8 will develop tests that capture that interaction and will also look at thermal interface materials, coolant compatibility, seals and quick disconnects.

The programme includes optical and copper I/O once integrated into a board or system, alongside the component qualification work already handled by JC-14.3. Other possible topics include high speed signal integrity, power delivery under sustained multi-kilowatt loads and electromagnetic compatibility at rack level.

JEDEC has invited equipment makers, system integrators, cloud operators and cooling suppliers to join its semiconductor members in the work. It plans to hold the first meeting on 26 January 2027 and has yet to issue a qualification standard from the new group.

Source: JEDEC’s original announcement via Business Wire.

Continue reading