News

Imec reaches baseline flow milestone for silicon interposer PDK

Imec has delivered baseline process flows for a silicon interposer platform within the NanoIC pilot line, ahead of a dedicated PDK due in early 2027.
a large machine in a large building

Illustrative image: Homa Appliances on Unsplash

Imec announced at SEMICON Europa 2026 that it has delivered baseline flows for a silicon interposer platform developed within the NanoIC pilot line, an early technical milestone toward a dedicated process design kit (PDK) for chiplet interconnect. The company says the PDK itself is scheduled for release in early 2027.

Silicon interposers act as a high-density routing layer beneath multiple dies in a package, providing short, dense connections between compute chiplets, high-bandwidth memory and other specialised components. Imec states the technology is particularly relevant to AI accelerators, GPUs and other high-performance multi-die systems where bandwidth and energy-efficient data movement are system-level requirements.

The reference platform captures the architecture, manufacturing flow and design characteristics of imec's silicon interposer technology, according to the company. Stated features include through-silicon vias, multiple metal routing layers, and support for microbump pitches down to 20 micrometres, intended to enable high-density connectivity between chiplets and memory within a 2.5D package.

From reference platform to PDK

The baseline flow forms the technical basis for the planned silicon interposer PDK, which imec says will let universities, start-ups and fabless companies explore the technology virtually using EDA environments from Cadence and Synopsys, ahead of its introduction into manufacturing. When released, it would join NanoIC's existing PDKs for fine-pitch RDL interposers and die-to-wafer hybrid bonding, which imec describes as already available.

Marie Garcia Bardon, department director at imec and a NanoIC work package leader, said the three interconnect technologies address different aspects of chiplet integration: silicon interposers for high-density routing in advanced compute, fine-pitch RDL interposers as a cost-efficient alternative at high interconnect densities, and die-to-wafer hybrid bonding for ultra-dense chip-to-chip connections.

Imec describes its longer-term ambition as extending this virtual PDK-based exploration into physical silicon demonstrators on the pilot line. The NanoIC pilot line is funded jointly by the Chips Joint Undertaking, through the EU's Digital Europe and Horizon Europe programmes, and by Belgium (Flanders), France, Germany, Finland, Ireland and Romania.

No physical silicon interposer demonstrator has yet been reported; the current milestone covers baseline process flows underpinning the forthcoming PDK, not a fabricated device.

Continue reading