News

Kodiak integrates MicroVision’s IRIS lidar into its next truck platform

The 1,550 nm lidar joins radar and cameras in Kodiak’s serviceable SensorPod, ahead of a planned driverless long haul launch by the end of 2026.
Articulated lorry on the road.

Illustrative image: Ahmet Polat on Pexels

Kodiak has integrated MicroVision’s IRIS lidar into the sixth generation of its autonomous truck platform, bringing the sensor into a serviceable SensorPod alongside radar and cameras. The platform is intended for a driverless long haul service that Kodiak plans to launch by the end of 2026, ahead of further expansion targeted for 2027.

MicroVision reports detection beyond 250 metres in this application, following evaluation in Kodiak operations under vibration, dust and changing weather and lighting. Its published sensor specifications give a maximum instrumented range of 280 metres across a field of view measuring 120° horizontally and 26° vertically. The distance at which a particular obstacle can be detected within that measurement window depends on the target and conditions; the companies have not disclosed those conditions for the truck application’s 250 metre claim.

For range precision, MicroVision specifies 4 cm at one standard deviation using a target 50 metres away with 10% reflectivity. This describes the repeatability of measurements under those conditions, while the wider field of view and range define the space the sensor can observe. Together, these characteristics shape the lidar data available to Kodiak’s perception system alongside the camera and radar inputs.

IRIS combines a 1,550 nm laser architecture, sensitive receiver and solid-state scanning, with a configurable frame rate from 1 Hz to 30 Hz. The enclosure measures 270 mm × 106 mm × 54 mm without mounting brackets, placing the optical assembly in a defined package that must fit within the SensorPod and retain its view of the road.

Grouping the sensors in a serviceable module also brings their mechanical installation into the fleet maintenance process. Their relative positions and combined outputs form part of the perception system, so the arrangement has to support repeatable servicing as well as sensing. Kodiak has not published the module’s calibration or replacement procedure.

As of 3 November, Kodiak reported its technology operating in 37 trucks owned and operated by a customer. It has not specified how many of those vehicles carry IRIS; the new integration concerns the sixth generation platform being prepared for the planned long haul service.

Sources: Joint announcement on MicroVision’s investor site; MicroVision IRIS product specifications.

Continue reading