News

Altera puts real-time qubit control on a direct RF FPGA

A reference design developed with Oxford Quantum Circuits and Nvidia pairs timed control and readout on the FPGA with calibration and classification on GPUs.
Quantum computing hardware against an abstract background.

Altera, Oxford Quantum Circuits and Nvidia have developed a quantum controller reference design that combines timed RF control on an FPGA with GPU processing for calibration and readout classification. An Agilex 9 Direct RF FPGA connects to OQC’s quantum processor through its RF conditioning electronics, while NVQLink carries data between the controller and Nvidia GPU servers.

The FPGA schedules the pulses applied to qubits and captures responses from the resonators at defined points in the sequence. Readout data can then pass to the GPU for heavier calculations, including classification of the quantum state inferred from the returned signal. This allocation keeps pulse timing and sampling under local control while allowing the processing of those measurements to use GPU resources.

Agilex 9 incorporates the analogue-to-digital and digital-to-analogue converters used in the design. Altera says direct RF operation removes the need for external stages to translate frequencies up and down, although OQC’s conditioning electronics remain between the FPGA and the quantum processor. Several readout frequencies can share one RF port, with the individual tones separated after capture rather than each requiring its own converter connection.

The supplied functions cover qubit and resonator spectroscopy, initialisation and readout, accompanied by a GPU classifier based on machine learning and example GPU functions for initialisation. An emulation path allows controller and software development to begin before a physical quantum processor is connected, so the system can be exercised through the control sequence before measurements such as actual readout fidelity become available.

NVQLink uses remote direct memory access over Ethernet to connect the controller and GPU server. The resulting link is part of the path between a measurement and its processing, alongside acquisition and classification, although Altera has not published an end-to-end latency measurement or a qubit count for this reference design. It expects to release the design in January 2027.

Sources: Altera quantum controller announcement; Nvidia NVQLink architecture.

Continue reading