SiTime launches FemtoClock 4 and VersaClock 8 timing devices

SiTime Corporation has introduced two clock chip families, FemtoClock 4 and VersaClock 8, aimed at data centre networking and computing hardware built around 224G serialiser-deserialiser (SerDes) links and PCI Express (PCIe) 7, both of which double bandwidth over the previous generation. The company says the two families together address a $2 billion serviceable addressable market (SAM) over the next five years.
Piyush Sevalia, executive vice president and chief business officer of SiTime, said: "Insatiable demand for AI, along with rising performance requirements, is driving the need for greater density and speed. The FemtoClock and VersaClock families have a 20-year heritage and multiple generations of products. Over this period, they have led the industry in performance, density and shipments, and have become the default choice for many customer designs. Engineers know these architectures well. This familiarity enables them to design with confidence, get the most from these programmable clocks and reuse existing software. The result is higher-performance, denser AI hardware that generates revenue sooner. Built on this successful track record, FemtoClock 4 and VersaClock 8 extend SiTime's lead in Precision Timing."
SiTime frames the launch against the rapid adoption of 224G SerDes links in data centre switches and AI servers, which double Ethernet bandwidth, alongside PCIe 7 for interconnects between CPUs, xPUs, memory, storage and smart network interface cards. According to Dell'Oro Group, 1.6 Tbps ports in AI back-end switches are expected to ramp at least five times faster than 800 Gbps, driven by adoption across scale-up, scale-out and scale-across networks.
Dave Altavilla, president and principal analyst at HotTech Vision and Analysis, said: "The AI infrastructure build-out is exposing bottlenecks that go well beyond GPU compute performance. Moving data efficiently across increasingly complex systems is becoming a critical design challenge, particularly as Ethernet and PCIe bandwidth requirements continue to climb. Precision Timing plays an important role here, especially as higher signaling speeds leave less margin for jitter and signal degradation. SiTime's latest clock families reflect how these underlying technologies are evolving to meet the precise needs of the next generation of AI data center architectures."
FemtoClock 4
FemtoClock 4 is a jitter attenuator and clock generator intended for top-of-rack and spine switches built on 224G SerDes. SiTime lists the following characteristics:
- 19 fs RMS phase jitter at 312.5 MHz in clock generator mode (12 kHz to 20 MHz, 4 MHz high-pass filter)
- Up to six frequency domains across 18 outputs
- Fewer devices needed for top-of-rack switches, which generally require more than 40 clocks
VersaClock 8
VersaClock 8 is a programmable clock generator providing reference clocks for CPUs, xPUs, memory and storage. SiTime lists the following characteristics:
- About 10 fs reference clock jitter for PCIe 7
- 30 fs RMS phase jitter at 312.5 MHz (12 kHz to 20 MHz, 4 MHz high-pass filter)
- Low power operation that limits self-heating, with operation up to 105°C
- 5-, 9- and 12-output variants in QFN packages from 4x4 mm to 6x6 mm
- 12-output variant said to be about 40% smaller than a comparable solution, according to SiTime
SiTime states that FemtoClock 4 and VersaClock 8 are in production and available now. FemtoClock 4 part numbers are RC38616, RC38412, RC32418 and RC32412. VersaClock 8 part numbers are RC31312A, RC31309A and RC31305A.



